Correspondence
Use the requirement form. There is no separate mailbox published on this site, and there is no public counter to visit.
Brief desk · illustration, not a street map
Contact LinkScope Sourcing 46
LinkScope Sourcing 46 reads the form on this page. No street address, switchboard, or social inbox is published, because those contacts are not on file. The reply path is the work email you type in the form.
Review window
Briefs are read on US business days after they arrive. No counter hours are posted, and a same-day reply is not scheduled from this page.
What to write
Rack units, usable depth, hinge hand, wall substrate, quantity, US destination, and the delivery window. Leave a cell blank if you have not measured it.
What a send does
A submission asks the desk to coordinate factory quotations. It does not reserve a cabinet, confirm a price, or approve a wall.
Cells the form should carry
- Rail opening in rack units, plus the outer height if you measured the skin.
- Usable depth after the door, hinge side as seen from the room, and swing in degrees.
- Hole pattern: square, tapped 12-24, or mixed. Cage nuts are a separate accessory if the holes are square.
- Wall substrate, stud spacing, and whether anchors are meant to be inside the price.
- Quantity in cabinets, the US ship-to, and whether timing starts at drawing approval.
A 12U rail opening is 21.00 in (533.4 mm). A 15U rail opening is 26.25 in (666.75 mm). Those figures are openings, not carton height. An 18 in or 450 mm outer depth still needs a second sentence for the space behind the front rail.
If an RJ45 panel shares the brief, name the port count and category, and keep insertion loss, return loss, and 100 ohm impedance on that jack line. Connector mating cycle is a jack rating. Power over Ethernet, switching capacity, and forwarding rate belong to a switch if one is mounted inside. Runtime belongs to a UPS line. Wavelength, optical budget, and dispersion belong to fiber jumpers. None of those electrical results are a property of the powder-coated box.
Optional budget needs a currency and a per-cabinet or whole-order basis. High-end, mid-range, budget, or undecided describes your preference. It is not a verified factory rating, and you do not need a live quotation before you send the brief.
Three limits stay on this desk. No phone number is published. The illustration above is not a map pin. Drawings follow a reply; this page has no upload control. Incoming inspection remains your step after a named supplier ships: count units, check hinge hand, and match the drawing revision.
New versus refurbished is still an open argument. A new body can carry a current revision and a warranty written for that model. A refurbished body can match an older hole pattern when dents, missing hardware, and remaining coverage are written down. The form can record which path you want compared. It cannot convert either path into stock.
Related reading sits on the 15U checklist and the inquiry labels. FREE sourcing support applies to qualified business buyers, with an eligible benefit of up to 3%. Eligibility applies to qualified business buyers and is confirmed after we review your product, quantity, destination, and sourcing requirements.